Planet - Wireless LAN 54Mbps Wireless Access Point w bridg inter building WAP 4030A.php

The WAP-4030A supports both IEEE 802.11b and IEEE 802.11g standards. You can use it to connect to an existing WLAN, or to build up a new wireless LAN. Except essential AP mode, WAP-4030A provides Repeater, Bridge, and Client modes to accommodate all kinds of network topology. High data rate (up to 54Mbps) support allows faster communication between LAN and WLAN. Maximize network efficiency via using the WAP-4030A while minimizing your network investment and maintenance costs.

The WAP-4030A provides the most security functions such as 64/128-bit WEP (Wired Equivalent Privacy) Encryption, WPA-PSK and MAC address filter to consolidate the wireless network security. There is no chance for the unauthorized wireless stations to access your wireless network.

With the user-friendly management interface and versatile features, WAP-4030A is the best choice to integrate your wireless and wired network seamlessly.

Product Application

Enterprise or Campus Users

In an enterprise or campus area, some mobile users may need a continuous network connection. By installing WAP-4030A in the area, mobile users can be always on the network by installing a wireless card in their notebook or PDA. The roaming capacity allows users to connect to the network to transparently roam from one access point to another.

Wireless ISP

A first mile solution now is simple with PLANET¡¦s wireless devices. No wiring is required and the provided bandwidth can be up to 54Mbps. By installing WAP-4030A equipped with omni-directional antenna in the user¡¦s neighborhood, all users around the access point can easily connect to Internet through the access point by installing a wireless PCI card or a WAP-4030A in Client mode.

LAN to LAN or LAN to Multi-LAN

Wiring inside your own building perhaps is an easy job, but it is hard if network cabling needs to go through some public areas or difficult wiring environments. The WAP-4030A can work in bridge or repeater mode to provide a robust solution for connecting two or more buildings together.

Key Features

	Compliant with the IEEE 802.11g/802.11b (DSSS) 2.4GHz specification
	High data rate up to 54Mbps network speed, Auto rate fallback
	Seamlessly integrate wireless and wired Ethernet LAN networks
	Interferences Provide 64/128-bit WEP Encryption and WPA-PAK authentication
	Supports Wireless AP / Client / Repeater and Bridge mode
	Supports MAC Address Filter
	Provides a reverse-polarity SNA connector for external antenna connection
	Web-based configuration
	Supports DHCP client for auto IP addresses assignment
	Wireless connection without the hassles and cost of cabling

SPECIFICATION

Product
Model	WAP-4030A
Standard	IEEE 802.11g/802.11b (Wireless), IEEE 802.3 (Wired)
Frequency Band	2.400~2.4835GHz
Transfer Rate	802.11g: 54/48/36/24/18/12/9/6Mbps 802.11b: 11/5.5/2/1Mbps
Modulation	OFDM@54Mbps, CCK@11/5.5Mbps, DQPSK@2Mbps and DBPSK@1Mbps
Radio Technology	Direct Sequence Spread Spectrum (DSSS)
Antenna	External detachable dipole antenna
Work modes	Client Access Point Repeater Point to Point Point to Multi-Point
Channel	FCC: 11 Channels (US, Canada) ETSI: 13 Channels (Europe) ELEC: 14 Channels (Japan)
Transmit Power	16dBm (Typical)
LAN Interface	1-port RJ-45 UTP
Cabling	Category 5/5e or above, 4-pair
LED Indicators	3; PWR, WLAN, LAN
Power	12V DC, 1A
Temperature	0 ~ 55 degree C (Operating)
Humidity	10 ~ 90%, non-condensing (Operating)
Dimension	169 x 87 x 30 (mm)
Weight	155g
Emission	FCC class B, CE-mark

Ordering Information

* WAP-4030A

54Mbps Wireless Access Point w/bridge, inter-building