Planet - Power over Ethernet 8 port 10 100Mbps Fast Ethernet Switch w 802 3af splitter built in FSD 803PE.php

The PLANET FSD-803PE is a cost effective 8-port switch with 1-port 802.3af splitter built-in. The 8-port switch provides eight 10/100Mbps Fast Ethernet interfaces that can be directly installed as a small workgroup. Port#1 of the FSD-803PE also supports 803.3af Power over Ethernet Standard.

Support dual power system, FSD-803PE either can be powered by 12VDC from the local AC outlet, or can be powered remotely through 802.3af Power over Ethernet standard. Port# 1 of the FSD-803PE supports IEEE802.3af Power over Ethernet standard that can negotiate with the remote 802.3af whether to feed the power or not. As soon as the network manager deploys the IEEE802.3af devices in the computer room such as the PLANET POE-150, the FSD-803PE can be powered from the POE equipment. For example, if there is a PC located at 200 meters away and would like to get connected, FSD-803PE would offer the most convenient way to make it. The manager needs simply to install FSD-803PE at the middle of the PC and the central network where 802.3af power over Ethernet feeding the power needed for the FSD-803PE. No additional power outlet is required.

With Auto-MDI support, FSD-803PE can direct wire to any Ethernet / Fast Ethernet devices through Category-5 UTP cable. LED indictors help diagnose the activities of the switch.

Product Application

Department Switch

Supporting 802.3af power over Ethernet, the FSD-803PE can be installed as a small department switch that gets the power from central, power-managed network through its port#1. This shall help the network installer free to find an AC power outlet for this remote switch, and also free from power shutdown if a UPS is installed in the central computer room.

Key Features

	Complies with IEEE802.3, IEEE802.3u, IEEE802.3af Ethernet standards
	8-port 10/100Mbps Ethernet ports
	1-port (port#1) support 48VDC in-line power
	Dual power system can be powered either from POE port or from local AC adapter
	Hardware based 10/100Mbps, half / full-duplex and 1000Mbps full duplex mode, flow control and auto-negotiation
	IEEE802.3x flow control for full duplex operation and back pressure for half duplex operation
	Integrated address look-up engine, support 2K absolute MAC addresses
	Automatic address learning and address aging
	Supports Auto MDI/MDI-X function
	Supports CSMA/CD protocol
	LED indicators for easy network diagnostic
	FCC, CE class A compliant

SPECIFICATION

Product
Model	FSD-803PE
Hardware Specification
10/100/Base-TX Ports	8 x RJ-45
POE port	1 (port#1)
Switch Processing Scheme	Store-and-Forward
Switch fabric	1.6Gbps
Throughput (packet per second @ 64byte)	1.12Mpps
Address Table	2K entries
Share data Buffer	1024Kbits
Flow Control	Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex
Dimensions	160mm x 80mm x 28mm (W x D x H)
Weight	0.4 kg
Power Requirement	48VDC, auto-detect by IEEE802.3af 12VDC, 800mA
LED indicators	System: 2; Power, POE Per port: 2; Link/Act, 100
Power Consumption / Dissipation	6 Watts, 20 BTU/hr
Temperature	Operating: 0~50 degree C Storage: -40~70 degree C
Humidity	Operating: 5% to 90% Storage: 5% to 90% (Non-condensing)
Standards Conformance
Regulation Compliance	FCC Part 15 Class A, CE
Standards Compliance	IEEE 802.3 (Ethernet) IEEE 802.3u (Fast Ethernet) IEEE 802.3af(Power over Ethernet) IEEE 802.3.x (Full-duplex flow control)

Ordering Information

FSD-803PE	8-port 10/100Mbps Fast Ethernet Switch w/IEEE802.3af splitter built-in
Relative Product
POE-150	IEEE802.3af Power over Ethernet Injector
POE-150S-5V	IEEE802.3af Power over Ethernet Splitter (5VDC output)
POE-150S-12V	IEEE802.3af Power over Ethernet Splitter (12VDC output)
POE-150S-9V	IEEE802.3af Power over Ethernet Splitter (9VDC output)